Lamination error?
Moderator: Daniel
Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/
___________________________________________________________________________________________________________
You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.
1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.
2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.
3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.
4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.
5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.
6. No spam. Do not post any links to your coin or other non-coin websites.
7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
Re: Lamination error?
Ok now after looking through more of error ref site I'm thinking it's a struck through something..I was also told lamination errors ate only on alloy coins is this true?
- DSCoins
- Coin Guru
- Posts: 3453
- Joined: Thu May 16, 2019 7:47 pm
- Location: South central PA.
- Has thanked: 157 times
- Been thanked: 931 times
Re: Lamination error?
Coinaddict411 wrote: ↑Tue Jul 27, 2021 5:56 pm Ok now after looking through more of error ref site I'm thinking it's a struck through something..I was also told lamination errors ate only on alloy coins is this true?
As for it being a lamination error, the Lincoln cent is copper plated zinc (some in 1982 and after) before that the were Copper (bronze). So no lamination error. As for strike through. I will let someone with more knowledge answer it.
USN Retired Jun1977-Jun 1997/100% disabled VET. (Not a wounded warrior)
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
Member CONACA
ANA
PCGS
NGC
Finds to date
2000-P .05C Strong Clashed Die O/R PCGS # 14129072 photo at maddieclashes
1983-P DDR FS-01-1983-501
5 2000 WAM FS- 901
- Paul
- Master Die Variety Examiner
- Posts: 18841
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 897 times
- Been thanked: 3274 times
Re: Lamination error?
I'm not sure how you are imaging this....
But it does not look like any "Lamination" error that I have seen, or any "Plating Blister" I know of
Surface contaminant?
But it does not look like any "Lamination" error that I have seen, or any "Plating Blister" I know of
Surface contaminant?
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
- Paul
- Master Die Variety Examiner
- Posts: 18841
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 897 times
- Been thanked: 3274 times
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
Re: Lamination error?
You may he right about surface contamination..that's related to subsurface corrosion right? Are ther normally this large?
- Paul
- Master Die Variety Examiner
- Posts: 18841
- Joined: Wed May 29, 2013 9:19 pm
- Location: Wisconsin
- Has thanked: 897 times
- Been thanked: 3274 times
Re: Lamination error?
With the illumination coming from the South/Southwest, wouldn't that make this "Raised" off the surface?
-
- Coinasieur
- Posts: 174
- Joined: Sun May 30, 2021 12:55 pm
- Has thanked: 54 times
- Been thanked: 7 times
Re: Lamination error?
It's a depression into the surface...probably just under a 1/16 deep....this pic probably doesnt help much but the lighting is coming straight down on it from the scope with the penny turned on its side.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 335 Views
-
Last post by Daniel
-
- 0 Replies
- 864 Views
-
Last post by Dkillett
-
- 7 Replies
- 702 Views
-
Last post by Earle42
-
- 2 Replies
- 1833 Views
-
Last post by Nolifeking
-
- 5 Replies
- 335 Views
-
Last post by Earle42
-
- 4 Replies
- 274 Views
-
Last post by Paul
-
- 5 Replies
- 320 Views
-
Last post by Paul
-
- 9 Replies
- 407 Views
-
Last post by Daniel
-
- 2 Replies
- 1581 Views
-
Last post by pahwa