Proof 1988-S silver eagle different thickness, discoloration on edge possible misalignment

Ask a question or post your most recent discovery.

Moderator: Daniel

Forum rules
Here's a link to how to post a topic with images in our community https://coinauctionshelp.com/welcome-to ... community/

___________________________________________________________________________________________________________

You also agree to follow these guidelines. You must agree to these rules to be a member of this forum. NO SPAM! Spam is deleted within minutes, no spam will ever be left in our community.

1. Post a front and back image of your coin with a specific question about what you’re seeing or asking about and one coin per topic.

2. Please remove coin from the holder unless it’s US or an official mint case or unless it is graded by a grading service.

3. Images should be taken by a camera or cell phone camera, we ask that members don’t use images through a microscope screen.

4. Always start your own topic, please don’t ask about your coin or post your coin in someone else’s coin topic.

5. Do not send private messages about your coin unless an Admin ask you too and the same for sending emails through the board.

6. No spam. Do not post any links to your coin or other non-coin websites.

7. Always be respectful even if something makes you upset or you don’t agree with a member. You can always get a second opinion elsewhere. If you have an issue then politely ask an admin in an PM. PM’s are for issues, technical and personal, but not for coin questions (refer to number 5 on this list). Our community is not a soap box for complaining or drama, so please refrain from doing so here.[/size]
Post Reply
Message
Author
Therro
Coining Around
Posts: 9
Joined: Sat Sep 18, 2021 12:49 am
Has thanked: 1 time

Re: Proof 1988-S silver eagle possible error?

#11 Unread post by Therro »

Took some measurements
Thickest part measures (measured at I in liberty on obverse) : 3.51 MM

Thinnest part measures : 2.93 MM

COIN WIDTH: 40.70 MM
Attachments
120EE006-56D7-41A2-BC24-39DD4D5023B4.jpeg
60AE07E3-D942-48A5-9CC8-B0A5F9144DF3.jpeg
CC652FB5-1273-43A7-8682-46AB5179AEFB.jpeg
01FEDF4E-76E6-40FB-ACED-76209123E0B0.jpeg
10B56B51-26A5-4B69-B0FA-27A036D4ADDA.jpeg
52E3C1BC-8D57-481A-BB26-42C793FE529B.jpeg

Therro
Coining Around
Posts: 9
Joined: Sat Sep 18, 2021 12:49 am
Has thanked: 1 time

Re: Proof 1988-S silver eagle possible error?

#12 Unread post by Therro »

SensibleSal66 wrote: Sat Sep 18, 2021 6:24 am Can you measure the thickness with a caliper ? If it was , and this is my own opinion, a tapered planchet error then it would affect both sides of the coin. This is where I'm confused .
Awaiting more answers .
Just posted measurements as well as a few more photos !

Therro
Coining Around
Posts: 9
Joined: Sat Sep 18, 2021 12:49 am
Has thanked: 1 time

Re: Proof 1988-S silver eagle possible error?

#13 Unread post by Therro »

Paul wrote: Sun Sep 19, 2021 10:14 am Excellent images.....

I see some discoloration on the reading across the area that is oversized..... I have no idea what that is....... possibly excessive heat from the strike?

May be a "Finned Rim" hit?.... Remember we are using images to diagnose this.....D
Thank you! I definitely was trying to capture the best images possible as I know it’s difficult and sometimes impossible to explain what You are asking as well as capture what you are seeing in person with a camera lens

Post Reply
  • Similar Topics
    Replies
    Views
    Last post